Air beds are very beneficial when it comes to accommodating houseguests in your home. They’re also comfy, easy to store, and portable. There are so many great things air beds offer, yet there’s just one thing on your mind.
Why is my air bed wet in the morning? The wetness may be from condensation. Condensation happens when air and ground temperature drops, as well as your body heat. When air beds are topped with a bed sheet, condensation forms on top of the surface as the air inside tends to stay at ground temperature.
Let’s look a bit further into condensation and the reasoning behind that wet or damp airbed.
Why Condensation in the Air Bed Happens
If air beds are insulated under instead of topping it, trapped air will allow the body temperature to rise, and condensation stays at the bottom. If you were using it at home and had it used on the floor where no air circulation took place under it, then likely you are experiencing the same – condensation.
The air bed is laid close to the floor, which can be the coldest area of your house. Raising it to the normal bed height so that ventilation and good airflow can take place could solve or at least minimize condensation. When you are on an outdoor camping trip and are using it without enough insulation underneath, heat from the air bed, which came from the warmth of your body, gets absorbed by the ground and moisture condensed on the cold bed.
However, condensation could be minimized if you have sufficient padding under the bed as the temperature remained as the air.
Sweat and Humidity
If you think that air beds make you sweat, you must be thinking it wrong. Your sweating must have something to do with the state you are sleeping in, like humidity. Air beds are made from materials that are not breathable, which increases the uneasiness related to sweating instead of causing it.
There should always be a fitted sheet between you and on top of your air bed to slow down sweat flush. Your room should also be well-ventilated, and in case of camping trips, open up the vents of the tent you are sleeping in.
To ease you from your unnecessary experiences, especially with the condensation and dampness with your air beds or air mattresses, you should try using upgraded air beds. There are plenty of air beds that hit the market today. However, choosing the best ones can be challenging since there is a wide range of options to choose from. Aside from thinking through the significant features of air beds, you have to consider what fits your needs.
How to Stop Condensation on an Air Bed
To make most of your air beds, you should consider the following dos and don’ts:
1. Keep Your Air Bed Inflated When Used for Several Days
Repetitively deflating and re-inflating your air beds make pointless strain on the seams. If you have a houseguest who is planning to stay for several days, leave the bed puffed rather than continually inflating and deflating throughout their stay.
2. Don’t Place It near Sharp Objects, Even Next to Your Family Pets
Repairing holes in your air beds can be very difficult. You may patch the holes with duct tapes or vinyl, though its durability will be compromised. Patching it can be a temporary solution, but once the air bed is punctured, you will likely have it replaced completely.
Keep it away from sharp objects like ball pens, pencils, paper clips, push pins, needles, or any items with blades that can puncture holes on the bed. If you have family pets that are used to sleeping on your couch or on any of your furniture, you should keep them away from the air bed, especially when they have long, sharp claws. Family pets may have the tendency to jump on and off your air bed, which can cause tension to its seals and seams.
3. Deflate Completely Before Storage
With the use of electric or battery-operated pumps, air beds can be inflated within minutes but can take longer to deflate completely. It might be enticing to unplug the air valve of the air bed and roll it over before storing it. However, this can be damaging to the seams of the bed.
Pushing the air out can cause tension to the seams, thus causing the closures to burst. You may unplug the air valve of the bed, but you have to allow the air bed to deflate before packing it for storage. You may know it that it is still deflating when you could still hear a faded hissing sound near the air valve.
4. Don’t Overfill
When you use an air bed for the first time, it should only be blown to about 90% of its total capacity. Filling the air bed to its maximum capacity can put additional stress or tensions on its seams and may eventually cause the bed to form lumps.
By considering all of these, focus on getting a good quality air bed.
Englander, for instance, has the first-ever fully microfiber exterior inflatable air bed that comes with a built-in pump. This leading microfiber air bed’s silky and soft flocking layers offer not just a strong and heavy-duty outer shell for the bed but also 20 percent more puncture and abrasion resistance.
It also features 30 percent more tensile power. The Englander’s First-Ever Microfiber California King Air bed (view on Amazon) is thermo-regulating, so you don’t have to fret about being chilled or overheated. Since it is 4 inches wider than any king air bed, you also don’t have to worry about flipping. Englanders promise unsurpassed durability-durable enough to use daily. Below are some of its features:
- Built-in pump
- Enhanced coil beam structure
- 20% more puncture and abrasion-resistant
- 30% more tensile strength
- Full microfiber exterior
- Uncompromised durability
- Easy and quicker inflation
Comfort Coil Technology
Another great option is the SoundAsleep Dream Series Air Mattress (view on Amazon), which is intended for in-home use. This air bed has remarkable features and is the industry’s leading design that exclusively uses Comfort Coil Technology and a sure grip under to guarantee firmness and stability.
This bed uses a fitted one-click internal pump, which makes inflation and deflation very quick and super easy. It is perfectly sized as it comes in double-height, and it’s structured with a dual-chamber, which is just the right size without taking up the whole room. It is made extra thick with a waterproof flocked layer to ensure a comfortable night’s rest so you can remain sound asleep! Some of its features include:
- 21 internal air coils
- Quick and easy inflation and deflation
- Perfectly sized “double-height” raised air bed
- Extra thick, waterproof flocked top
- Multi-layered, puncture-resistant
- Internal high volume pump
The last one on our recommendations is the double-sized Air Mattress from King Koil (view on Amazon). The King Koil brand has been famous for its foam beds and beds with internal springs. Compared to other brands, King Koil mattresses and air beds are more expensive since they are made with time-tested materials.
The bed’s improved coil technology provides you with sturdy support to keep your spine properly aligned as you rest. Its coil beam structure made the weight properly distributed. The bed has a double high elevation that will give you the feeling of using a regular bed and a soft-napped layer, which made the fitted bed sheets skid-free. It has an extra-thick comfort quilt top plus extra spinal support, which contributes to a better sleeping posture.
Like any other upgraded air bed, it comes with a fitted pump. The high volume built-in AC pump inflates the air bed in 90 seconds. It is two times faster than the regular contending beds. Another remarkable feature of this bed is its valves. It has separate valves where inflation and deflation are separated, thus making the bed easier and quicker to use. If you happen to tear or puncture the air bed, patch kits are ready since it is an inclusion to all King Koil air beds.
Since this is specially designed for domestic use, it is best for houseguests, friends, and relatives who plan to stay overnight. If you want them to feel comfortable and had more space just like a regular bed, you can check for a larger size: Twin, Queen, and California King. Some of its features are as follows:
- Fully soft flocked layers
- Built-in pillow for maximum comfort
- Extra thick and water-resistant cozy quilt top
- Extra spinal support
- Double-sized with coil-beam structure
- No-slip button
- Plugged-in internal pump for fast & easy inflation
Conclusion – Why Is My Air Bed Wet in the Morning?
Condensation in your air bed can be something that could happen when there’s no proper air circulation around. As a result, you’ll end up sweating if there’s enough ventilation. Fortunately, with the tips provided above, you’ll be able to prevent the issue of having your air bed wet right after you wake up.